| Home | About Us | Products | Employment | Contact Us
Size Units Per Cube
Product Description
2 x 8 x 16
330 Solid (Patio Block)
3 x 8 x 16
150 Solid
4 x 4 x 16
288 Hollow Ashlar
4 x 4 x 16
216 Solid Ashlar
4 x 8 x 8
360 Hollow Corner
4 x 8 x 12
240 Hollow Corner
4 x 8 x 16
180 Hollow Regular, Corner & Utility
4 x 8 x 16
150 Solid
[ Products ]
Size Units Per Cube Product Description
6 x 8 x 8 240 Hollow Corner,
Sash
6 x 8 x 14 144 Hollow Corner
- Starter
6 x 8 x 16 120 Hollow Regular, Corner -
Sash
6 x 8 x 16 100 Solid
6 x 8 x 16 120 Bond Beam
6 x 4 x 16 216 Hollow Ashlar
6 x 4 x 16 166 Solid Ashlar
[ Products ]
Size Units Per Cube Product Description
8 x 8 x
8 180 Hollow Corner, Sash
8 x 8 x 16 105 Hollow Regular, Corner -
Sash
8 x 8 x 16 90 Corner – Sash (Cubed
Separately)
8 x 8 x 16 90 Solid Regular (Thick
Wall)
8 x 8 x 16 90 Solid Header (5 X 4 Cut
Out)
8 x 8 x 16 90 Hollow Header
8 x 8 x 16 90 75% Solid
8 x 8 x 16 75 4 Hour Fire Rated
8 x 8 x 16 75 Solid
8 x 8 x 16 75 FHA – Semi Solid Cap
8 x 8 x 16 90 Bond Beam
8 x 8 x 16 90 Knockout Bond Beam (Horz.
& Vert. Rebar)
8 x 16 x 8 90 Knockout Beam Lintel
8 x 8 x 24
60
Hollow Regular, Labor Saver
8 x 4 x 16 180 Hollow Ashlar
[ Products ]
Size Units Per Cube Product
Description
10 x 8 x
16
75 Hollow Regular
10 x 8 x 16 75 Single
Corner, Sash
10 x 8 x 16 78 Bond
Beam
10 x 16 x 8 78 Beam
Lintel
10 x 8 x 8 130 Hollow
Corner, Sash
[ Products ]
Size Units Per Cube Product
Description
12 x 8 x 16 65 Hollow
Regular
12 x 8 x 16 65 Single
Corner, Sash (Cubed Separately)
12 x 8 x 16 60 FHA –
Semi Solid Cap
12 x 8 x 16 65 75%
Solid
12 x 8 x 16 60 Beam
Lintel
12 x 8 x 16 60
Knockout Bond Beam (Horz. & Vert. Rebar)
12 x 16 x 8 60
Knockout Beam Lintel (Conduit)
12 x 8 x 8 120
Hollow Corner, Sash or Plain
12 x 4 x 16 108
Hollow Ashlar
12 x 4 x 16 84 Solid
Ashlar
14 x 8 x 16 54 Hollow Regular
[ Products ]
[ Products }
Size Units Per Cube Product
Description
12 x 8 x 16 60 Natural
Gray Split Face
12 x 8 x 16 60 Natural Gray
Split Face Bond Beam
12 x 8 x 8 144 Natural Gray
Split Face Half
8 x 8 x 16 90 Natural
Gray Split Face
8 x 8 x 16 90 Natural
Gray Split Face Return Corner
8 x 8 x 16 90 Natural
Gray Split Face Bond Beam
8 x 8 x 8 144 Natural
Gray Split Face Half.
4 x 8 x 16 150 Natural Gray
Split Face Solid
**Split Face Block can be special ordered in colors**
[ Products ]
STANDARD REINFORCED LIGHTWEIGHT CONCRETE LINTELS
4”
x 8 “ 6” x 8”
8” x 8”
36”
36” 36”
40” 40” 40”
44” 44” 44”
48” 48” 48”
52” 52” 52”
56” 56” 56”
60” 60” 60”
64” 64” 64”
68” 68” 68”
72” 72” 72”
84” 84” 84”
96” 96” 96”
108” 108” 108”
120” 120” 120”
144” 144” 144"
**Special lintel reinforcing, shapes (cutout/drop), sizes or higher strength concrete are available upon request**
[ Products ]
Concrete Products *
Concrete Pipe * Parking Bumpers
Custom Concrete Masonry
* Split Face, Split Fluted, Color or Standard Gray Units
Glazed Block, Ground Face
Block * Assorted Colors or Standard Gray Units
Foundation Accessories
* Access Doors, Anchor Bolts, Anchor Straps & Vents
Masonry Accessories *
Flashing, Reinforcing Wire, Wall Ties, Expansion Joint Material
Masonry Sand *
Zonelite
Mortar, Colored Mortar, High
Strength or Standard Mortar, Portland Cement
Pittsburgh Corning Glassblock
* Soundblox
[ Products ]
Concrete Masonry Units
1. SIZE:
Provided Concrete Masonry Units Complying with Requirements Indicated Below for Size the are Manufactured to Specified Face Dimensions within Tolerances Specified in Applicable Referenced ASTM Specification.A. Manufacture concrete masonry units to specified dimensions of 3/8 inch less than nominal widths by nominal heights by nominal lengths.
2. PROVIDE SPECIAL SHADES WHERE INDICATED AND AS FOLLOWS:
A. For lintels, corners, jambs, sash, control joints, headers, bonding and other special conditions.
B. Square-edge units for outside corners except where bullnose units are indicated.
B. HOLLOW AND SOLID LOAD-BEARING CONCRETE MASONRY UNITS:
ASTM C 90 and as Follows:
A. Type II
B. Weight Classification: Lightweight (maximum density of less than 105 PCF) and a maximum linear drying shrinkage of 0.065% when tested in accordance with ASTM 426. Fabricate using lightweight aggregate that strictly conforms to ASTM C 331. Normal weight aggregates, when used in blending with lightweight aggregates to achieve a smooth, tight texture, shall conform to ASTM C 33.
C. Unit compressive strength not less than 1900 psi average net area to provide system performance requirement of F'M 1500.
C. CONCRETE BUILDING BRICK: ASTM C 55 and as Follows:
A. Unit compressive strength: provide units with minimum average net area compressive strength to meet systems performance requirement.
[ Products ]
ESTIMATING GUIDES
Standard Block -1.13 block per square foot of wall area
Regular Brick -7.0 brick per square
foot of wall area
Oversize Brick
-5.5 brick per square foot of wall area
MORTAR QUANTITIES
Per 1,000 Units Mortar Cement
Bags Sand-Tons
4” and 6” Regular Block
20 4
8”, 10” and 12”
25 5
Regular Brick
7 11/4
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
APPROXIMATE VOLUME REQUIRED TO FILL CORE VOIDS IN BLOCK
8 x8x16 2 core
0.25 cu. ft./block
10x8x16 2 core
0.33 cu. ft./block
12x8x16 2 core
0.39 cu. ft./block
[ Products }